Grade 410 430 stainless steel cold rolled coils BA Finish

Cold Rolling Process for Steel Coil

Cold rolling: Using hot-rolled steel coils as raw materials, oxidizing the hides and removing the scales and then performing tandem cold rolling. The finished products are rolled hard rolls. The cold work hardening due to continuous cold deformation makes the strength, hardness, and toughness of the rolled hard rolls rise. The plastic index drops, so the stamping performance will deteriorate, and it can only be used for simple deformed parts. Rolled hard coils can be used as raw materials for hot dip galvanizing plants because hot dip galvanizing units are all provided with annealing lines. The weight of the rolled hard coil is generally 6~13.5 tons. The coil is continuously rolled at room temperature under the normal temperature. The inner diameter is 610mm.

Cold Rolled Coil Product features:

Because it has not been annealed, its hardness is very high (HRB is greater than 90), and its machining performance is extremely poor. It can only perform simple directional bending processing (with a direction perpendicular to the take-up direction) of less than 90 degrees.

Cold rolling is performed at a normal temperature by hot-rolled sheet. Although the steel sheet is heated during rolling, it is still called cold-rolled. Due to cold rolling after continuous hot rolling, the mechanical properties are poor and the hardness is too high. It must be annealed to restore its mechanical properties. No annealing is called rolled hard rolls. Rolled hard rolls are generally used to make products that do not need to be bent or stretched, and have a hardness of 1.0 or less. Hard rolled luck is good on both sides or on four sides. Grand Metal supplies cold rolled steel coil and sheet product for worldwide customers, if you are interested contact us now!